FRITZ!Box 3370 Service - Knowledge Base

FRITZ!Box 3370 Service

Changing the FRITZ!Box's IP address

You can change the FRITZ!Box's IP address ( in the factory settings) in order to

  • have the computers in the FRITZ!Box home network be assigned IP addresses from an IP network of your choice via DHCP.
  • integrate the FRITZ!Box into an existing network belonging to an IP network other than

Requirements / Restrictions

  • The settings in this guide are not available if the FRITZ!Box shares the Internet connection of another router ("IP client mode"). In this case, proceed as described in this guide.

Important:Some of the settings described here are only displayed if the advanced view is enabled in the user interface. The configuration procedure and notes on functions given in this guide refer to the latest FRITZ!OS

1 Changing the FRITZ!Box's IP address

  1. Click "Home Network" in the FRITZ!Box user interface.
  2. Click "Home Network Overview" in the "Home Network" menu.
  3. Click on the "Network Settings" tab.
  4. Click the "IPv4 Addresses" button.
  5. Enter the desired IP address and subnet mask.
  6. Click "OK" to save the settings.