FRITZ!Box 6810 LTE Service - Knowledge Base

FRITZ!Box 6810 LTE Service

Throughput of the mobile connection is too low

The FRITZ!Box displays the speed of the mobile connection on the user interface under "Internet > LTE Information > LTE" in the "Throughput" line. According to this, the throughput is significantly lower than the speed specified in your mobile contract with your mobile network operator.


  • The throughput of the LTE connection depends on factors such as the distance from the LTE base station, the shielding effect of the walls of your own house, of neighboring houses, and also trees. Storms and other users located in the same radio cell can also reduce the throughput.

    Important:In many cases, you will not be able to fully achieve the throughput stipulated in your mobile contract. Therefore, mobile network operator say that they offer speeds of "up to" a certain value.

Note:The configuration procedure and notes on functions given in this guide refer to the latest FRITZ!OS for your FRITZ!Box.

Simply proceed as described below. After each measure, check whether the problem persists.

1 Installing the latest FRITZ!OS for the FRITZ!Box

Installing the latest FRITZ!OS makes your FRITZ!Box compatible with the latest LTE technology used by LTE providers in their radio cells:

2 Finding the ideal location for the FRITZ!Box

You can use the alignment aid to find the ideal location for the FRITZ!Box and the best position for the LTE antennas:

  1. Click "Internet" in the FRITZ!Box user interface.
  2. Click "Account Information" in the "Internet" menu.
  3. Select the frequency band "Only 2.6 GHz / band 7". If the option is not displayed, enable the Advanced View first.

    Note:Normally you can achieve a higher data throughput with the 2.6 GHz frequency band than with the 800 MHz frequency band.

  4. Click "Apply" to save the settings.
  5. Click "LTE Information" in the "Internet" menu.
  6. Click on the "Reception" tab.
  7. Click the "Start Alignment Aid" button.
    • Now the FRITZ!Box shows the signal strength of both LTE antennas.

      Note:When the alignment aid is active, the current signal strength is also displayed in a five-level display on the FRITZ!Box LEDs. This means that you can also find the best location for the FRITZ!Box without using the FRITZ!Box user interface.

  8. Select a location for the FRITZ!Box where the value shown is as high as possible. When doing so, note the following:
    1. Do not set up the FRITZ!Box in the corner of a room.
    2. Position the FRITZ!Box as close to an outside wall as possible. If you know where your provider's LTE radio cell is located, position the FRITZ!Box by the wall facing the LTE radio cell.
    3. Position the FRITZ!Box so that it is as unobstructed as possible, i.e. not directly in back of or under an obstacle (for example pieces of furniture, heater).
  9. If the quality of the LTE connection in the 2.6 GHz frequency band is not sufficient:
      1. Click "Account Information" in the "Internet" menu.
      2. Select the frequency band "Only 800 GHz / band 20".
      3. Click "Apply" to save the settings.
      4. Click "LTE Information" in the "Internet" menu.
      5. Click on the "Reception" tab.
      6. Start the alignment aid and repeat the adjustment procedure for the FRITZ!Box.

3 Contacting your provider

Your mobile network operator may have throttled the mobile connection if a particular data limit was exceeded, or your operator may be experiencing technical difficulties:

  • Have your mobile network operator check your mobile connection.