FRITZ!Box 7330 Service - Knowledge Base

FRITZ!Box 7330 Service

Callers hear a busy signal instead of a ringing tone when a call is already being conducted via FRITZ!Box

Callers hear a busy signal instead of a ringing tone when a telephone call is already being conducted using the FRITZ!Box.

Important:Some of the settings described here are only displayed if the advanced view is enabled in the user interface. The configuration procedure and notes on functions given in this guide refer to the latest FRITZ!OS

1 Configuring the FRITZ!Box

  1. Click "Telephony" in the FRITZ!Box user interface.
  2. Click "Telephony Devices" in the "Telephony" menu.
  3. Click the button (Edit) for the relevant telephone.
  4. Click on the "Telephony Device Features" tab.
  5. Disable the option "Call rejection on busy (busy on busy)".
  6. Enable the "Call waiting" option.
  7. Click "OK" to save the settings.

If the same telephone number is used to conduct both of the calls, then it must be possible to use the telephone number for two connections at the same time. This is usually the case for Internet numbers, but never possible on analog landlines. If callers still hear a busy signal, then this telephone number can only be used for one connection. This is why your telephony provider gives the caller a "busy" signal.