FRITZ!Fon C4 Service - Knowledge Base

FRITZ!Fon C4 Service

Setting up room monitoring (baby monitor)

You can set up your FRITZ!Fon as a baby monitor and then use it for room monitoring. When room monitoring is enabled, the telephone automatically calls another telephone connected to the FRITZ!Box or an external line (for example in the neighboring apartment) when a certain noise level is reached.

Requirements / Restrictions

  • The FRITZ!Fon must be registered with a FRITZ!Box.

1 Setting up the telephone

  1. Press the "Menu" key on the telephone.
  2. Scroll to "Supplementary services" and press "OK".
  3. "Baby monitor" > "OK"
  4. "Destination no." > "OK"
  5. Enter a destination number (for example the number of an external line),
    • or:
      • Press "Options" and select a telephone book entry or an internal telephone number.
  6. Select "Activation" and press "OK".
  7. Select "Options", define the sensitivity, and press "OK". A notification call is triggered as soon as the bar is completely filled. The higher the sensitivity, the lower the level of ambient noise required to fill it.
  8. Position the telephone as desired.
    • Room monitoring is disabled as soon as you leave the "Baby Monitor active" menu. When you enable room monitoring, the telephone switches to silent mode and does not ring when you receive a call.