FRITZ!Powerline 510E Service - Knowledge Base

FRITZ!Powerline 510E Service
Not your product?
This document is also available for the following products:

Loading the FRITZ!Powerline adapter's factory settings

Load the factory settings to delete all of the individual settings you made in your FRITZ!Powerline adapter. This makes sense if you are going to use the FRITZ!Powerline adapter at a different location or are planning to pass it on to another user, for example. In addition, this deletes incorrect settings that prevent correct operation.

You can either use a button or the FRITZ!Powerline software to load the factory settings.

1 Pushing a button to load the factory settings

  1. Plug the FRITZ!Powerline adapter into an electrical outlet.
  2. Push the corresponding button on the device:
    ModelButtonDuration
    FRITZ!Powerline 500E / 520E "Reset" 2 seconds
    FRITZ!Powerline 510E / 530E "Security" 12 seconds
    FRITZ!Powerline 540E / 546E "WLAN/WPS" and "Powerline · Security" 10 seconds
    FRITZ!Powerline 1000E / 1220E "Powerline · Security"  10-15 seconds
    FRITZ!Powerline 1240E "WLAN-WPS/Powerline · Security" 15 seconds
    FRITZ!Powerline 1260E "Connect" 15 seconds
  3. All LEDs flash once during this process. The "Power" LED or "WLAN" LED remains lit as soon as the factory settings have finished loading.

2 Using FRITZ!Powerline software to load the factory settings

Preparations

Loading the factory settings

  1. Start the FRITZ!Powerline software.
  2. Double-click the image of the FRITZ!Powerline adapter whose factory settings you want to load.
  3. Click the "Reset" button and then "OK" in the "Device Profile" window.