FRITZ!Powerline 510E Service - Knowledge Base

FRITZ!Powerline 510E Service
Not your product?
This document is also available for the following products:

Loading the FRITZ!Powerline factory settings

When you load the factory settings, all of the individual settings you made in FRITZ!Powerline are deleted. It makes sense to load the factory settings if you are going to use FRITZ!Powerline at a different location or are planning to pass it on to another user, for example. In addition, this deletes incorrect settings that prevent FRITZ!Powerline from functioning properly.
Either a button on the device itself or the FRITZ!Powerline software can be used to load the factory settings.

1 Using a button to load the factory settings

  1. Plug the FRITZ!Powerline adapter into an electrical outlet.
  2. Push the corresponding button:
    • If you have a FRITZ!Powerline adapter with three buttons on the front of the device:
      • FRITZ!Powerline 546E and 540E:
        • Push the "WLAN/WPS" and "Powerline/Security" buttons simultaneously for at least 15 seconds.
      • FRITZ!Powerline 1000E/1220E:
        • Push the "Powerline-Security" button for 10 seconds.
      • FRITZ!Powerline 1240E:
        • Push the "WLAN/WPS" / "Powerline-Security" button for at least 15 seconds.
    • If you have a FRITZ!Powerline adapter with two buttons on the base of the device:
      • Push the "Reset" button with a pointy object such as a paperclip for 2 seconds.

        Fig.: Pushing the "Reset" button for 2 seconds

    • If you have a FRITZ!Powerline adapter with a button on the base of the device:
      • Push the "Security" button for 12 seconds.

        Fig.: Pushing the "Security" button for 12 seconds

Now all of the LEDs go out for a brief moment and the FRITZ!Powerline adapter restarts. The process is completed as soon as the "Power" or "Powerline(/Security)" LED remains lit again.

2 Using the FRITZ!Powerline software to load the factory settings

Preparations

Resetting a FRITZ!Powerline adapter

  1. Plug the FRITZ!Powerline adapter into an outlet near the computer on which the FRITZ!Powerline software is installed.
  2. Use a network cable to connect the FRITZ!Powerline adapter to the computer.
  3. Start the FRITZ!Powerline software on the computer and double-click the icon for the FRITZ!Powerline adapter.
    • The "FRITZ!Powerline Device Profile" window now opens.
  4. Click the "Reset" button and then "OK" in the next window.

Now all of the LEDs go out for a brief moment and the FRITZ!Powerline adapter restarts. The process is completed as soon as the "Power" or "Powerline(/Security)" LED remains lit again.