Mises à jour : toutes les nouveautés

Ici, accédez à toutes les informations relatives aux mises à jour gratuites. Sélectionnez tout simplement votre produit FRITZ! et profitez des nouvelles fonctionnalités ainsi que des extensions issues du service de développement d'AVM.

retour à la recherche

Info on FRITZ!Box 7530 AX

Product: FRITZ!Box 7530 AX
Version: FRITZ!OS 7.80
Language: English, Dutch, French, Italian, Polish, Spanish
Release date: 30/01/2024

New features:

  • Simplified configuration for connection to a fiber optic modem (ONT)
  • The speed of the Ethernet connection between LAN 1/WAN and the upstream device (e.g., fiber optic modem) is displayed on the overview page
  • further improvements and bugfixes

With each FRITZ!OS update, AVM also updates its security functions. Therefore we recommend performing the update for all devices.

Below you find a complete list and descriptions of the new functions in the latest FRITZ!OS, along with a list of further improvements in this version.

New functions of FRITZ!OS 7.80

Internet:

  • NEW Simplified configuration for connection to a fiber optic modem (ONT)
  • NEW The speed of the Ethernet connection between LAN 1/WAN and the upstream device (e.g., fiber optic modem) is displayed on the overview page

Further Improvements of FRITZ!OS

DSL:

  • Improved Reworked DSL overview for FRITZ!Box
  • Improved ADSL2 interoperability problem let to connection disruptions for some remote sites

Internet:

  • Fixed IPv6 sharing settings as "Exposed Host" for devices with delegated IPv6 prefix were sporadically deleted
  • Fixed Problem with DNSSEC validation in FRITZ!OS
  • Fixed When an internet connection was reestablished, occasionally an outdated IPv6 prefix was not deleted on a downstream router
  • Improved Increased robustness of time determination (NTP)
  • Improved New provider "Odido" can be selected for the Netherlands
  • Improved Preset upstream and downstream values adjusted for internet connection on an external modem

Telephony:

  • Fixed During an active parallel call, after a brief period the call was signaled only at the call destination
  • Fixed Termination of outgoing calls to certain mobile sites after two minutes
  • Improved Telephony more stable

DECT/FRITZ!Fon:

  • Change Presets for the Deutschlandfunk web radio stations were updated

System:

  • Improved Stability

New functions of FRITZ!OS 7.56

System:

  • NEW In the new energy-saving mode, Wi-Fi, LAN and USB use even less power for slightly reduced performance
  • NEW New wizard transfers all important Internet, telephony, and WLAN settings as well as connections to mesh, telephony, and smart home devices to a new FRITZ!Box <for more, see [7]>

New Features in FRITZ!OS 7.50

Internet:

? NEW Automatic prioritization provides for fairly distributed data rates throughout the entire FRITZ!Box network (home network and guest network) ? NEW VPN with WireGuard for simple setup of fast, secure VPN connections <for more, see [2]> ? NEW The MyFRITZ! direct connection allows you to receive information on the FRITZ!Box in real time on MyFRITZ!Net.

Wi-Fi:

? NEW An open Wi-Fi network can be offered at the Wi-Fi guest access, in which only data are transmitted in encrypted form (Enhanced Open/Opportunistic Wireless Encryption, OWE)

Telephony:

? NEW Call handling allows call blocks and call diversion (e.g. to answering machine) for callers "not in the telephone book" (telephone book as positive list) ? NEW On a SIP DDI line for corporate customers, call diversion settings can be configured so that the caller number is displayed at the destination (partial rerouting)

DECT/FRITZ!Fon:

? NEW The new, optional "Voice" ringtone announces the name in the telephone book that matches the caller number, or the location and the telephone number. For an alarm or appointment, the ringtone announces the reason for the reminder <for more on this, see [1]> ? NEW The new FRITZ!Fon convenience function "Appointment Calendar" rings to remind about appointments ? NEW Handset can display WiFi password, also QR Code for convenience, Can be protected by PIN code

Smart Home:

? NEW Configure and apply scenes to generate the mood for any occasion <for more on this, see [5]> ? NEW Create and enable or disable routines (if-then combinations) for automatic interactions in the Smart Home <for more on this, see [5]> ? **NEW Templates for the comfort functions switch Wi-Fi access, switch Wi-Fi guest access, start telephone call, switch answering machine, send email (push service), and open web service (URL) ? NEW Selection of an additional display of the temperature and humidity profile on the FRITZ!DECT 440 ? NEW Natural lighting sequences for device groups and templates with FRITZ!DECT 500 ? NEW Support for compatible external window sensors for the radiator controls' open window detection

USB:

? NEW Support for storage media formatted in exFAT

System:

? NEW "Help and Info" in the user interface: A completely overhauled help function with many instructions based on user scenarios and a strong search engine

Further Improvements of FRITZ!OS 7.57

System:

  • Fixed stability and security increased

Wi-Fi

  • Changed Wi-Fi 6 signal fields adjusted

Further Improvements of FRITZ!OS 7.56

Internet:

  • Improved Clarified wording when configuring WireGuard VPN connections
  • Improved NTP interoperability improved through better estimation of the hardware clock's deviation
  • Improved Optimized switching from public DSN servers to provider-side DNS servers
  • Improved The setting to send all IPv4 data traffic of the FRITZ!Box via the WireGuard VPN connection to (!) a single device is no longer supported
  • Fixed "Reserve bandwidth in the home network" did not work with IPv6
  • Fixed Accessing websites in the Wi-Fi guest network failed occasionally
  • Fixed During preparation of the first WireGuard connection via remote dial-in the FRITZ!Box ended up in permanent wait mode
  • Fixed In certain scenarios, switching the type of internet connection led to the WAN interface being switched to LAN
  • Fixed Interoperability of IPSec VPN connections to LANCOM remote sites including usage of VNC and RDP with active packet acceleration not available
  • Fixed MyFRITZ! access permission (device sharing) could sometimes only be terminated via IPv4
  • Fixed Occasionally an IPv6 prefix sharing of a previous "outdated" prefix for a downstream router was not deleted
  • Fixed On DS Lite connections, switching off IPv6 manually (incorrect configuration) could result in repeated dial-in attempts by the FRITZ!Box
  • Fixed On TIM connections (Telecom Italia), configuration of a WireGuard connection led to repeated clearing of the internet connection
  • Fixed Parental controls: Tickets for devices with the standard profile could not be redeemed
  • Fixed Problems with functionality and/or display of the parental controls in certain application scenarios
  • Fixed Repeaters sometimes used external NTP servers for initial time determination even if the upstreamFRITZ!Box offered an NTP server
  • Fixed Under certain circumstances a switch to public DNS servers occurred although the current DNS server could be reached
  • Fixed Under certain circumstances a switch to public DNS servers took place too early
  • Fixed VPN: When configuring an IPSec-LAN-LAN connection, the address of the FRITZ!Box was not proposed
  • Fixed When all IPv4 data traffic was routed over a WireGuard VPN connection, incoming calls were not always signaled
  • Fixed When packet acceleration was enabled during longer LAN-LAN linkups to CISCO remote sites via IPSec, occasional connection losses occurred

Wi-Fi:

  • Fixed Mesh Repeater operating mode: The "Select Wi-Fi Network" list did not display invalid Wi-Fi network names (SSID)

Mesh:

  • Fixed After changing the connection of a repeater, the connection display on the "Home Network > Mesh" page of the user interface was wrong
  • Fixed When using certain powerline adapters together with a network switch, the connection display on the "Home Network > Mesh" page of the user interface was wrong

Telephony:

  • Improved Robuster handling of inconsistent data in Apple telephone contacts
  • Improved Support for using up to 10 individual telephone numbers (MSNs) with the "Telekom CompanyFlex" rate
  • Change Outdated entries removed from the list of telephone providers

DECT:

  • Improved Support for DECT headsets from the Sennheiser EPOS series for outgoing calls and picking up calls via the headset button

Home Network:

  • Fixed Devices with a dot in their name could no longer be renamed
  • Fixed Display for search for updates for devices in the Mesh was not suitable in certain cases
  • Fixed Possibly lacking rendering of IP addresses could cause subsequent defects

System:

  • Fixed "Change notice" push service sent too often information on supposedly new port sharing
  • Fixed Repeater events were occasionally listed twice in the Event Log
  • Fixed There were too many events on changed settings in the Event Log

Mobile Network:

  • Improved Internet connection with username/password supported for Alcatel IK41VE1 IoT/M2M 4G (MBIM) mobile network dongle

USB:

  • Fixed No network drive function (SMB) could be established to Rclone
  • Fixed WebDAV online storage could not be used when the country was set to "Spain"

Additional improvements in FRITZ!OS 07.50

DSL:

? Improved Higher connection quality and stability to multiple remote sites ? Improved Adjusted calculation of available bandwidth in the user interface

Internet:

? Improved When the DNS server of the internet provider (or the listed DNS server) is interrupted, automatic switch to the public DNS server ? Improved Failure detection via DNS validation added for "Expanded failover protection" ? Improved FRITZ!Box services (SMT, FTP, IGD and TR-064) offered via Bonjour or mDNS ? Improved Unwanted queries from certain IP addresses to FRITZ!Box services can be blocked with the new IP block list ? Improved "QUIC" added to the internet protocols supported by parental controls ? Improved When internet access to storage media via FTP/FTPS is enabled, the randomly preselected port number is displayed ? Improved Support for VPN user dial-in for Android mobile telephones and tablets with IKEv2 IPSec (preshared key) ? Improved Optimized upload and download speeds by adjusting the TCP segment size (MSS clamping), now also for IPv6-based connections ? Improved IPv4 VPN connections (IPSec) can be tunneled via IPv6, for instance to reach FRITZ!Box devices on DS Lite connections (IP6 tunnel for IPv4, IPv4-inIPv6) ? Improved In the user interface, an image now illustrates the different types of VPN connections ? Improved Better interoperability with Cisco AnyConnect VPN solution ? Improved No publication of IPv4 address to MyFRITZ!Net on dual-stack connections with carrier-grade NAT; MyFRITZ! address always resolved here into the IPv6 address ? Improved After a restart, the FRITZ!Box refreshes its IP address with MyFRITZ!Net immediately (DynDNS update) ? Improved A FRITZ!Box in "Mesh Repeater" mode is automatically registered with the MyFRITZ! account of the Mesh Master ? Improved IPv6 on the FRITZ!Box enabled by default for all internet connections ? Improved FRITZ!Box can be operated on IPv6-only connections ? Improved Support for IPv6 during prioritization of network applications and prioritization of a home network device ? Improved The IPv6 Interface Identifier used on the WAN port is chosen at random ? Improved Improved tips and error messages on sharing ports on DSL Lite connections with PCP support ? Improved Data traffic from Wi-Fi calling (VoWifi) with smartphones prioritized over the FRITZ!Box internet connection ? Change Predefined selection of DynDNS providers replaced by a general settings option ? Change The "IPv6" tab is displayed for IPv6-only connections ? Change Support for the User Service Platform specification (USP, Broadband Forum TR-369) and configuration on the "Provider Services" tab ? Change The NetBIOS filter can be displayed and configured (FRITZ!Box Cable only) ? Change When a new port sharing setting is created, the outdated "eMule" application is no longer listed ? Change Outdated entries removed from the provider list for internet access ? Fixed The ICMP identifier for pings was set to 0 by the FRITZ!Box in some rare cases ? Fixed The FRITZ!Box could send an invalid Phase1 ID for VPN user dial-in via IPSec ? Fixed The entry field for the IPv6 LAN prefix was too small ? Fixed The IPv6 address could not be entered manually for IPv6 port sharing ? Fixed Devices in the guest network with a captive portal were not connected to the internet via IPv6 ? Fixed IPv6: When SLAAC was used and the DHCPv6 server was disabled in the FRITZ!Box, after a restart IPv6 could not longer be used in the home network ? Fixed In individual cases, deletion of a port sharing setting deleted additional port sharing settings of the same device ? Fixed VPN connections (IPSec) to StrongSWAN via IPv6 failed under some circumstance ? Fixed VPN connections (LAN-LAN) could not be saved without a name ? Fixed In some scenarios the FRITZ!Box's NTP server did not work after re-establishing the internet connection ? Fixed Under certain circumstances, not all DNS servers made available by the provider were used

Wi-Fi:

? Improved When a radar event is detected, the system attempts to hold the channel with reduced bandwidth ? Improved When encryption on the Mesh Master is changed to "non-encrypted", activation of the 5-GHz Wi-Fi network is ensured and wireless devices are correctly deregistered if necessary ? Improved Data rates increased when exchanging data with certain wireless devices ? Improved The legend below the "Allocation of Wi-Fi Channels" diagram on the "Wi-Fi / Wi-Fi Channels" page is now displayed in a single line ? Improved Optimized automatic channel selection when checking for prioritized use in the 5-GHz Wi-Fi network ? Improved The adjustment of radio channel settings in the 5-GHz frequency band now allows all channel numbers to be selected ? Change New message under "System / Event Log" when a new session key was negotiated (encrypted connections compliant with the WPA3/SAE standard) ? Change Restructuring of the "Wi-Fi > Wi-Fi Network", "Wi-Fi > Security", and "Wi-Fi > Wi-Fi Channel" pages ? Change MAC address filters are limited to a maximum of 128 entries ? Fixed On the user interface for the "Wi-Fi Guest Access", starting the WPS quick connection was linked with the "Wi-Fi / Security / WPS" page ? Fixed Incorrect information when Wi-Fi disabled when "Internet connection via Wi-Fi" is selected ? Fixed The period for displaying the load on the Wi-Fi channel could not be changed in the user interface when the 2.4-GHz Wi-Fi network was disabled ? Fixed Maximum transmitter power could not be changed in "LAN bridge" mode ("Wi-Fi / Wi-Fi Channel" page, FRITZ!Repeater only) ? Fixed Sorting of "Other Wi-Fi Networks in Your Vicinity" table by name did not always work reliably ("Wi-Fi / Wi-Fi Channel" page) ? Fixed Preset name for Wi-Fi guest access linked to the language selection ? Fixed When a WPS quick connection was started during the check for higher-priority users (e.g. radar), an incorrect message could be displayed under "System / Events"

Mesh:

? Improved Higher data throughputs in the Mesh Wi-Fi possible thanks to dynamic smart repeating ? Improved Display of home network connections on the "Mesh" page of the user interface responds more quickly to changes ? Improved Home network devices (e.g. printers or NAS) displayed in the "Mesh Overview" can be opened directly by link ? Improved Changed country and language settings of the Mesh Master are automatically transmitted to the Mesh Repeater ? Improved New message in "System / Event Log" when FRITZ!OS removes a network loop ? Improved "Mesh Overview" now shows network switches that use the LLDP protocol ? Improved "Mesh Overview" now shows deployed network switches or access points in sequence ? Improved Indication on the start page of the user interface when there are FRITZ! devices in the home network that are not yet enabled for Mesh ? Improved Region and language settings of the FRITZ!Box are adopted by FRITZ!Repeater(s)

Telephony:

? Improved Online contacts from web.de, gmx.de, and 1&1 converted to CardDAV ? Improved Revised display of table of configured call diversions ? Improved Encrypted telephony more robust against lost connections ? Improved Optimization for integration of a telephone book into Mesh ? Improved Designation of a caller's telephone number in the call list, even when a telephone number specified by the caller was also transmitted ? Improved Optimization of automatic configuration of telephone numbers by the internet provider ? Improved Reworked texts for push services on fax function and answering machines on fax function and answering machine ? Improved Support for more call scenarios with voice data transmission before call acceptance (P-Early-Media) ? Improved Wizard for telephony devices enables configuration of internal fax function without enabling fax reception ? Improved Display of certain table columns in the "Telephone Numbers" can be switched on or off ? Improved CAPI over TCP can be disabled if desired via "Diagnostics / Security" ? Improved Prioritization of telephony data adjusted to comply with the Deutsche Telekom specification 1TR112 V14 ? Improved FRITZ!Box takes note of the last 20 destination telephone numbers for call diversion and offers these when new call diversion settings are configured ? Improved For messages on the answering machine, the name that matches the caller's number in the telephone book, or the location and telephone number, can be announced while listening to messages ? Improved Call diversion settings and call blocks for incoming calls can be restricted to a single telephone number in the home network ? Improved Supports groups for online contacts from Apple ? Improved Support for photos for online contacts from Apple, Telekom, and CardDAV providers ? Change Different designations in the user interface for telephones on the "FON 1" and "FON 2" jacks ? Fixed If the internal fax machine was used with the "only send" setting, incoming calls were not logged in the call list ? Fixed Newly created telephone numbers could not always be edited retroactively ? Fixed Root number was not displayed when the settings of the SIP DDI line were edited ? Fixed Umlauts in the names of telephony devices were sometimes converted into special characters ? Fixed Under certain rare conditions, the initiator of a three-party conference was not able to hear the two other parties

DECT/FRITZ!Fon:

? Improved Higher resolution of images from Google online contacts ? Improved Convenient control of DECT headsets that are GAP or CAT-iq 2.x-compliant ? Improved Quick dial for number keys 2 to 9 can be set up directly on the FRITZ!Fon by pressing and holding the numbers ? Improved More convenient use of DECT handsets ? Improved Three new ringtones with bird sounds available for FRITZ!Fon ("Whistling", "In the Woods" and "Yardbirds") (configured under "MENU / Settings / Audio / Ringtone / Own ringtone") ? Change Missed calls older than 28 days are no longer signaled by a message key blinking red on the FRITZ!Fon

Home Network:

? Improved Reworked details pages for network devices ? Improved FRITZ!Powerline devices can be restarted in the "Device Details" of the FRITZ!Box user interface under "Home Network / Network" or registered by clicking a button ? Improved Own network device highlighted in the overviews of the user interface ? Improved More flexibility when assigning your own names for a network device in the home network for display in the user interface: Spaces and special characters are allowed ? Improved The symbol in the user interface for prioritized network devices was updated ? Improved Reworked user guidance through changing of the FRITZ!Box name

Smart Home:

? Improved Template for radiator controls expanded with addition of comfort temperature and cool-down temperature as well as antifreeze and boost functions ? Improved Sunrise/sunset schedule with more settings options independent of sunrise and sunset ? Improved The "Adaptive heating start" function can be disabled for radiator controls ? Change "Smart Home" menu subdivided into "Devices & Groups", "Automation" and "Operation"

USB:

? Improved Media data are read in completely with "Refresh index" ? Improved A list of FRITZ!Box users with the right to access NAS contents is displayed under "Home Network Sharing" ? Improved A message appears indicating when the maximum number of sharing links is exceeded ? Improved After completion of fax configuration, a USB folder for storing faxes can be selected under "Settings for the Fax Function" ? Change When uploading files to fritz.nas, the creation date of the respective file is now displayed ? Change MagentaCloud removed as a media source in the internet because API is no longer compatible ? Change After indexing, the ".start_indexation.mp3" file is no longer displayed via SMT/FTP ? Fixed Added radio stations were displayed only after manual indexing ? Fixed After starting operation of "FRITZ!Box as Mesh Repeater", the network drive function (SMB) was not always available ? Fixed Accessing a sharing link allowed the creation of additional sharing settings ? Fixed During the slide show of FRITZ!NAS images, the control for the duration of the display was not displayed correctly ? Fixed Folders in the uppermost level of the directory structure were not displayed in the selection dialog for moving files

System:

? Improved New display of Wi-Fi connections between FRITZ! devices ? Improved Summary of information areas on the "Overview" page for better orientation ? Improved New design and improved operation concept for logging in to the FRITZ!Box user interface <for more on this, see [4]> ? Improved Revised layout of the FRITZ!Box user interface <for more on this, see [4]> ? Improved Changed operating concept for changing settings in the user interface <for more on this, see [4]> ? Improved Under "System / FRITZ!Box Users / Apps", the FRITZ!Box user from which each app has been configured is displayed for each app ? Improved The "Forgot Password" push service email now contains information on the device that requested this mail ? Improved If desired, the selection list of FRITZ!Box users can be hidden during login to the user interface from the home network ? Change Simplified flashing behavior of the FRITZ!Box LEDs when connection is triggered by the "Connect" button ? Change The hyperlinks for Contents, Manual, Tips & Tricks, en.avm.de, and Legal Notice are now located under "Help and Info" ? Change New contents under "Help and Info / Get to Know the Functions" ? Change Additional confirmation for configuring certain settings can no longer be switched off <for more on this, see [6]> ? Change The push service for the Wi-Fi guest access sends registration and deregistration events of the guest devices from the Mesh Repeater or Mesh Master with which the devices are registered ? Fixed The display of several "Exposed Hosts" for two different devices under "Diagnostics / Security" was sometimes misleading

Mobile network:

? Improved Expanded failover protection supports smartphones and mobile network dongles with tethering function ? Improved Failure detection via DNS validation added for expanded failover protection ? Change Simple failover protection removed - existing configurations are converted to expanded failover protection ? Fixed Page at "Internet / Mobile Network" was empty when a mobile broadband dongle was inserted

Security:

? Improved Use of a random SIP port possible under "Telephony / Telephone Numbers / Line Settings / Security" ? Improved All a user's rights listed under "System / FRITZ!Box Users" ? Improved Information about security methods currently used on SIP remote sites under "Diagnostics / Security / Telephony" ? Improved Display of the last ACS connections under "Diagnostics / Security / Provider Services (TR069)" ? Improved While login is blocked due to an incorrect password entry, the password entry field can be edited for the next login attempt ? Improved SIP port can be reached from the internet only by the set protocol (IPv4 or IPv6) ? Improved Protection from frequent login attempts with incorrect password via the SMB protocol

[1] Talking caller ID - FRITZ!Fon learns to speak: New features for FRITZ!Fon New "Voice" Ringtone The new "Voice" ringtone announces the name of the caller, if available, or the location the call is coming from along with the telephone number of the caller. The feature is available for incoming calls, but a voice announcement can also be selected for alarms and appointments. When you get a call, instead of a ringtone the caller's name is announced if their telephone number is in your contacts. If there is no telephone book entry, the location from which the call is coming is announced, depending on the country, along with the telephone number of the caller. You'll need to have an active MyFRITZ! account. This feature can be enabled under "Telephony / Telephony Devices" in the user interface. Select the FRITZ!Fon handset you want to edit, assign one or more telephone numbers for incoming calls, and then switch to "Ringtones". Select there the "Voice" ringtone for the corresponding telephone number at the end of the list. You can configure additional settings under "Voice Ringtone". For alarms and the appointment calendar you can select the "Voice" ringtone directly on the FRITZ!Fon. Appointment Calendar With the new calendar, you can now set up appointments in FRITZ!Fon and create a reminder for them. You can also be reminded of the appointment with the new "Voice" ringtone. Note: The new features are available for FRITZ!Fon M2, C4, C5 and C6 with the latest handset firmware.

[2] WireGuard Support for Simple Setup of VPN Connections WireGuard(R) is a modern, easy to understand, fast, and simple VPN solution. For most operating systems, there are apps or programs from WireGuard for connecting single devices to a network via WireGuard VPN. WireGuard is a registered trademark of Jason A. Donenfeld (https://www.wireguard.com). WireGuard is not compatible with other VPN protocols. Therefore it cannot connect to IPSec, OpenVPN and similar peers. WireGuard itself does not contain any mechanisms for key distribution. Both parties therefore require the public keys of the respective remote site. The concept for the FRITZ!Box is that both key pairs can be generated on the FRITZ!Box to set up a connection, and all the necessary dial-in data can be imported on the client side via a file or QR code, e.g. in the WireGuard App. For your FRITZ!Box to be accessible via WireGuard VPN, you need a MyFRITZ! address your (you'll need to register your FRITZ!Box with MyFRITZ!Net) - or a third-party DynDNS address for your FRITZ!Box. Please note that the connection configuration - QR code or configuration file - is not permanently stored on the FRITZ!Box (for security reasons). Do not let the QR code or configuration file fall into the hands of unauthorized persons.

[4] More Operating Convenience in the FRITZ!Box User Interface The FRITZ!Box user interface has been visually refreshed with the new version. Particularly noticeable here is the separation of the menu from the left edge of the screen and the width of the displayed pages have been trimmed for better readability. This has a positive effect on tables and texts, especially when displayed on particularly large screens (resolutions), and at the same time improves the display on smartphones and tablets. The redesign is based on a new style guide that facilitates the integration of innovative operating concepts.

[5] Automation Scenes - Create the Perfect Mood for Every Occasion With scenes you can simultaneously perform different actions in the Smart Home. For example, with the "Coming Home" scene, all radiator controls can be set to the comfort temperature at the touch of a button, and your LED lights and smart plugs, the Wi-Fi and/or guest Wi-Fi, and the answering machine can all be switched on at the same time. The preconfigured two scenes "Coming Home" and "Leaving Home" and can be applied directly. They consist of automatically generated templates that can be subsequently turned on and off as required. With a scene you create yourself, multiple devices can be combined and controlled. Templates that have already been created can be added and deleted on an individual basis. Furthermore, individual templates can be created as a simple scene. Settings for devices and/or device groups can be saved and reused with templates. Scenes can be used via the FRITZ!Box, a FRITZ!Fon, FRITZ!App Smart Home or the FRITZ!DECT 440. Routines - for Customizable Automations in the Smart Home Routines enable devices, scenes and templates to be automatically controlled or enabled by an if-then link. The shortcut consists of a trigger and a condition that must be met for an action to be performed. In the Configuration Wizard, you can define a device as a trigger, then specify the change in state or an event (condition). Finally, a previously created scene or template (action) is selected, which is activated when the condition is met. For example, if the humidity measured by the FRITZ!DECT 440 reaches a certain level, the previously configured scene "Ventilation" with a FRITZ!DECT 200 smart plug with a connected humidifier is applied.

[6] Additional Confirmation After this update, additional confirmation for certain settings and functions can no longer be disabled. However, if additional confirmation was disabled before the update, this condition remains intact after the update. AVM recommends always using additional confirmation for reasons of security. To allow changes to protected settings from on the go, the TOTP standard with one-time passwords can be also used for additional confirmation. A freely available password manager or a separate app like the Google Authenticator can be used for this.

[7] New wizard transfers all important settings for the internet, telephony, and Wi-Fi network, and connections to Mesh, telephony and Smart Home devices to a new FRITZ!Box. Please take note of the following tips and requirements: The Wizard provided in this FRITZ!OS offers assistance if you are using a FRITZ!Box that you would like to replace with another new FRITZ!Box. Any other FRITZ! products connected with your currently used FRITZ!Box, including FRITZ!Repeaters, FRITZ!Fons, FRITZ!DECT Smart Home products, and FRITZ!Apps will also be connected to the new FRITZ!Box. This new switching function makes it easier to exchange your old FRITZ!Box with another FRITZ!Box, so that

  • the Wi-Fi and home network and all of the connected home network devices will work the same after the switch
  • no settings have to be changed on the devices connected with the FRITZ!Box because of the switch
  • the internet connection and telephony can continue to be used in the same way
  • all important settings on the currently used FRITZ!Box are transferred to the new FRITZ!Box (for instance, for telephony, Smart Home, and MyFRITZ!)
  1. Two steps must be taken to prepare the other, new FRITZ!Box:
    • a current FRITZ!OS version 7.55 or newer. During the course of the wizard you will be prompted to update your new FRITZ!Box if necessary.
    • Set your new FRITZ!Box back to its factory settings , if it was used at all before, and then disconnect it from electrical power.
  2. The currently used FRITZ!Box provides the internet connection on your line and has the latest FRITZ!OS version 7.55 or newer.
  3. If you use any FRITZ!Repeaters: Update their FRITZ!OS.
  4. If you use FRITZ!Fons or FRITZ!DECT Smart Home products, check whether a software update is available and, if so, install it.
  5. If you use FRITZ!Apps for the previously used FRITZ!Box, have your smartphone ready.
  6. You must have physical access to the FRITZ!Box you are currently using, so that you can insert its network cable and press the buttons. The other, new FRITZ!Box should be close at hand. You will also need to connect to electrical power and the internet for the switching procedure.
  7. If you are not only changing the FRITZ!Box model, but also the type of connection (for instance, from DSL to fiber optic), then the other, new connection must be ready for operation.
  8. You must be connected with the homei network of the currently used FRITZ!Box with a notebook or computer (recommended) or by smartphone. Under "Wizards" in the http://fritz.box user interface there is a "Transfer Your Settings to a New FRITZ!Box" link to click. Read the instructions presented there and follow them carefully. The process usually takes around 10 to 30 minutes, depending on the complexity of the home network.

####New features for Mesh

General information on Mesh is presented at en.avm.de/mesh-networking.

Enabling the Mesh Function

To check whether a FRITZ! product is enabled for Mesh, see the Mesh Overview of the FRITZ!Box (the Mesh Master) under "fritz.box -> Home Network -> Mesh". Here the products in the Mesh are designated with a corresponding "Mesh active" symbol.

A FRITZ!WLAN Repeater or FRITZ!Powerline Adapter with FRITZ!OS 6.90 or higher installed can be enabled for Mesh in various ways:

  • If the product has the ex works settings configured and is being connected with the FRITZ!Box for the first time, it will be automatically enabled for Mesh.
  • If the product is already connected, but not enabled for Mesh, it is added to the Mesh by pressing a button on the product to be integrated and a button on the FRITZ!Box. On the FRITZ!Box, use the button that initiates WPS (depending on the model, press the "Connect" or "WPS" button briefly, or the "WLAN/WPS button for 6 seconds)

If you've received the second FRITZ!Box from your internet provider this feature may not work in some cases. Please configurate this FRITZ!Box as a mesh repeater by visit the FRITZ!Box GUI manually. Instructions for configuring a FRITZ!Box connected via wireless LAN as a Mesh Repeater are presented at en.avm.de/mesh-faq

Telephony Mesh and Smart Home Mesh

With FRITZ!OS 7.0, telephony and Smart Home are also compatible with the Mesh.

The connections of cordless telephones and Smart Home products are displayed in the FRITZ!Box Mesh Overview. You can use a second FRITZ!Box as Mesh repeater, and use telephones registered with the second FRITZ!Box with the numbers assigned in the first FRITZ!Box, the "Mesh Master".

Configuring a second FRITZ!Box as a Mesh repeater with the press of a button

Requirements:

  • Your existing FRITZ!Box supports Mesh (FRITZ!OS 6.90 or higher). This box is the Mesh Master.
  • The FRITZ!Box to be deployed as a Mesh repeater has been updated to FRITZ!OS 7.0 and you have restored its settings ex works. This box is to become the Mesh repeater.

Here's how:

  • Connect the LAN1 port of the Mesh repeater with the Master using a LAN cable
  • Initiate the Connect function on both boxes (7590: press the "Connect" button briefly; 7490: press and hold down the WLAN/WPS button for 6 seconds)

After the connection procedure is concluded, the second FRITZ!Box is ready for operation as a Mesh repeater. (It operates in "IP client" mode and, as a Mesh repeater, adopts the wireless LAN settings and other important settings from the FRITZ!Box).

Please note that this function can be used only if the second FRITZ!Box is permanently connected with the first box by LAN cable.

Instructions for configuring a FRITZ!Box connected via wireless LAN as a Mesh repeater are presented at en.avm.de/mesh-faq

Transmit the telephone numbers of a Mesh Master to another FRITZ!Box in the home network

Once you have added an additional FRITZ!Box to the Mesh, you can configure it so that all telephone numbers are available on each FRITZ!Box. If your FRITZ!Box is connected with a landline, you can use the telephones connected to the second FRITZ!Box to make calls over the internet as well as on the landline. If the latest FRITZ!OS 7.0 is installed on both FRITZ!Boxes, the telephone numbers are transferred automatically in the Mesh once the "Telephony in the Mesh" option is enabled.

If the new FRITZ!Box is already part of the Mesh, or if you have already set up telephone numbers there, these telephone numbers must be deleted and one of the two FRITZ!Boxes must be restarted.

Then the new FRITZ!Box must be enabled for "Telephony in the Mesh". To do so proceed as follows:

  • Click on "Home Network" in the user interface of the Mesh Master.
  • Click on "Mesh" in the "Home Network" menu.
  • Click on the "Mesh Settings" tab.
  • In the "Use Telephony in the Mesh" section, click on the "Enable" link next to the Mesh repeater in question and then confirm this operation on the Mesh Master as well, if prompted to do so.

The telephone numbers are now distributed in the Mesh and can be assigned to your telephones and other terminal equipment for telephony (for instance, answering machines) on the FRITZ!Box.

Note: Telephony Mesh is not the same thing as DECT repeating, which requires the support of special hardware on the FRITZ!Box deployed as the Mesh Master. If you would like to use DECT repeating, you can purchase the FRITZ!DECT Repeater 100 from an electronics retailer.

Display of 802.11k and 802.11v support on wireless devices

FRITZ!OS now displays wireless devices that support the wireless standards 802.11k and 802.11v directly in the user interface. Both standards are already widespread for wireless devices and are important prerequisites for the further development of Mesh WiFi for the fastest, lowest-interference, and most convenient control of wireless devices in Mesh environments To find out whether your wireless devices offer support for the 11k and/or 11v standards, see the "Properties" under the Wireless / Radio Network menu, or use the "Edit" function to display the properties of each wireless device.

####Additional Innovations in FRITZ!OS 7.0

What's new for the FRITZ! Hotspot

The new FRITZ!OS 7.0 vmakes setting up and using the FRITZ! Hotspot even easier. It's now even easier for users to choose whether the wireless guest access should be provided as an open hotspot, or encrypted as a private hotspot. If an open hotspot is chosen, the guests do not need to enter a security key. Caf\E9s, doctor's offices and small businesses, as well as all FRITZ!Box users, can provide their customers and visitors an easy-to-use internet access that complies with the current legal regulations. Whether it's private or public hotspot, guests cannot access the home network, but surf using a second wireless LAN provided by the FRITZ!Box.

Secure and Complete Control

The operator of the hotspot can decide which applications can be used in the guest network and which are prohibited. Daily email messages notify the operator of the hotspot about which devices were registered in the radio network and when. Another advantage is the option to reserve bandwidth. This options allows you to specify how much of the data rate is reserved for their own wireless LAN and how much is available to their guests.

Individual & Convenient

The Welcome page of the FRITZ! Hotspot offers additional convenience. Caf\E9s or businesses can greet their guests with a short welcome text, photo or logo. If desired, the guests can also be requested to consent to the terms of use for the hotspot. The hotspot is also available in locations where FRITZ!WLAN Repeaters or powerline devices supporting WiFi provide for better coverage.

Increased speed when using USB storage media with NTFS data systems

If you're using USB sticks or flash drives on your FRITZ!Box that are formatted with the data system NTFS, you can benefit from increased speed during transmission. You don't have to do anything - just continue to use the existing USB storage media as before. To check what data system is used, go to Home Network -> USB Storage Media in the FRITZ!Box user interface.

New security feature in the wireless LAN: "Protected Management Frames (PMF)"

FRITZ!OS now supports additional security during registration of devices with the wireless LAN. "Protected Management Frames" ("PMF" for short) offer additional protection for the wireless connection during the setup phase. PMF is standardized according to IEEE 802.11w-2009 and is automatically offered to or negotiated with wireless devices that support this technology. The new feature is available in the user interface under Wireless > Security > Additional Security Settings.

Support for Telekom SIP Trunking

With FRITZ!OS AVM 7.0 provides support for the SIP trunking technology from Deutsche Telekom. For a few months now, Deutsche Telekom has been offering its business clients a SIP Trunk standard, making it easy to switch from ISDN to IP-based ports. The FRITZ!Box supports up to 20 direct inward dialing (DID) numbers for telephones connected directly to the FRITZ!Box. If a user's phone tariff contains more than 20 direct inward dialing numbers, these can be used with an ISDN PBX (Private Branch Exchange) for the system connection via the FRITZ!Box's internal S0 interface. With FRITZ!OS 7.0, the FRITZ!Box supports the "Deutschland LAN SIP Trunk" and "Deutschland LAN SIP Trunk Pooling" tariffs.

Detailed configuration instructions are presented in the following guide:

https://avm.de/service/fritzbox/fritzbox-7590/wissensdatenbank/publication/show/3305_Telekom-SIP-Trunk-in-FRITZ-Box-einrichten/

MyFRITZ! access to your FRITZ!Box via internet now without security messages in the browser

When you access the user interface of your FRITZ!Box from the internet, a security warning may be displayed in the browser. The new FRITZ!OS version enables your FRITZ!Box to receive a SSL certificate for your MyFRITZ! address from the organization letsencrypt.org. Browser access via the MyFRITZ! address to the interface of FRITZ!Box is no longer accompanied by a security warning, since most browsers trust the certificates from letsencrypt.org.

Proceed as follows:

  1. First you need to register your FRITZ!Box with MyFRITZ! (myfritz.net).
  2. Under "Internet / MyFRITZ! Account", enable the "Let's encrypt" optLet's Encryption.
  3. Confirm by clicking "Apply" and wait for the status "Certificate issued successfully".

Your FRITZ!Box has the certificate created for your MyFRITZ! address and uses it for browser access to this address, for example when you access your FRITZ!Box via your account on https://myfritz.net.

It's also possible to send links for FRITZ!NAS file sharing (for example photos) to third parties, who'll have access without annoying certificate warnings. This way, FRITZ!NAS becomes an even greater alternative to cloud storage services.

Note: To receive the certificate, the TCP port 443 of your FRITZ!Box is open for a few minutes. The certificate is currently valid for 60 days and is then renewed by the FRITZ!Box. HTTPS access to your FRITZ!Box via public or local IP address, "fritz.box" in the home network or over a DynDNS provider do not use the certificate from letsencrypt. MyFRITZ!App: After activation of the Let's Encrypt certificate in the FRITZ!Box, the MyFRITZ!App notifies you once about the change of the certificate fingerprint. Select "trust" to continue using the new certificate.

Option for assessing and, if necessary, remedying detected interference with VDSL from Powerline

In the Internet / DSL Information / Interference Resistance menu of the FRITZ!Box, any interference with VDSL that may have been caused by FRITZ!Powerline can be minimized. This process of checking and adjusting can take up to ten minutes. During this time, the load on the powerline connection may affect the network quality and internet connection. This procedure can be repeated to optimize the interaction of VDSL with a high-performance powerline installation step by step, and the adjustmented settings can be returned to their original configuration.

This option is available only if VDSL interference was detected that could have been caused by a FRITZ!Powerline product.

Support for DECT ULE/HAN FUN

DECT-ULE/HAN-FUN is a manufacturer-independent standard for Smart Home devices.

The following sensors passed testing with FRITZ!OS 7.0 to confirm that they work with HAN-FUN:

  • SmartHome wall switches (https://www.smarthome.de/geraete/telekom-smarthome-wandtaster)
  • SmartHome door/window sensor (https://www.smarthome.de/geraete/eurotronic-smarthome-tuer-fensterkontakt-optisch)
  • SmartHome motion detector (https://www.smarthome.de/geraete/telekom-smarthome-bewegungsmelder-innen) Please note: The HAN-FUN devices are not supported by DECT repeaters. Other types of sensors can also be used as long as their manufacturers have declared them to be compatible with DECT-ULE/HAN-FUN. Actuators from the Telekom SmartHome product range are not supported at this time (e.g., InDoor/OutDoor adapter plugs, sirens).

Used in combination with a FRITZ!Box and the FRITZ!DECT 200/210 smart plug, they can be used to realize the following scenarios:

  • Press wall switch => Outlet is switched => Light on/off
  • Motion sensor triggered => Light on in the home/garage/yard
  • Window sensor open/closed switches FRITZ!DECT 200 => connected humidifier / air purifier switches off/on Please note during installation: The Telekom app cannot be used to install SmartHome devices to be deployed with a FRITZ!Box. The HAN-FUN devices are connected (paired) with the FRITZ!Box via the DECT button. In addition to the AVM Smart Home devices, a maximum of ten HAN-FUN devices can be registered with a FRITZ!Box.
    After successful DECT pairing, the new devices are listed in the FRITZ!Box user interface (Home Network => Smart Home) as "HAN-FUN function xxx" and their properties can be configured accordingly.

Disclaimer: Due to the general conditions prevalent in radio technologies, as well as certain special product properties of products, AVM cannot guarantee the complete functionality of devices from other manufacturers.

Support for Speedphone 11 from Deutsche Telekom

With FRITZ!OS 7.0 it is possible to use a Speedphone 11 with advanced telephone functions with a FRITZ!Box. For this the software of the Speedphone 11 must be updated.

Please note: At the time of publication in July 2018, a corresponding update was forthcoming.

If the firmware version 4.01 is installed on your Speedphone 11, perform the following steps:

  1. Register the Speedphone 11 with the FRITZ!Box according to these instructions, during which the expanded security functions of the FRITZ!Box will be disabled briefly: https://avm.de/service/fritzbox/fritzbox-7590/wissensdatenbank/publication/show/3288_Speedphone-nach-Neustart-der-FRITZ-Box-abgemeldet/
  2. If a new Speedphone firmware is available for updating, it will be offered automatically. Alterntively, you can perform a manual check via the menu.
  3. Once the firmware has been updated (> version 4.01), the security functions disabled in step one should be reactivated in the FRITZ!Box.
  4. Re-register the Speedphone 11 with the FRITZ!Box.

The Speedphone 11 is now available for telephone services with DECT encryption enabled. The following features were tested successfully:

  • caller ID display
  • caller ID
  • access to the FRITZ!Box address book
  • call list
  • use of the FRITZ!Box answering machine

Disclaimer: Due to the general conditions prevalent in radio technologies, as well as certain special product properties of products, AVM cannot guarantee the complete functionality of devices from other manufacturers.

Instructions for installing the update:

Use the update function offered in the user interface to install the update. This automatically offers you the right FRITZ!OS. Click "Wizards", select "Update" and then follow the instructions on the screen.

(c) AVM GmbH 2004-2023. All rights reserved.

This AVM firmware package contains files that are propagated under different licenses, in particular under a license held by AVM or under an open-source license (namely the GNU General Public License, GNU Lesser General Public License or FreeBSD License). For details on the various licenses, see the "license.txt" file (https://download.avm.de/fritzbox/license.txt). The source code of the files propagated as open source files can be obtained upon a written request to fritzbox_info@avm.de.

AVM grants the non-exclusive right to use this AVM firmware package, which is supplied exclusively in object code format. The licensee may create only one copy of the software, which may be used exclusively for backup use. AVM reserves all rights that are not expressly granted to the licensee. Without previous approval in writing, and except for in cases permitted by law, it is particularly forbidden for this AVM firmware packet to be

  • copied, propagated, or in any other manner made publicly accessible, or
  • processed, disassembled, reverse engineered, translated, decompiled or in any other manner "opened" and subsequently copied, propagated or made publicly accessible in any other manner.

DHA 2024-30-01..

Sélection de la langue